Triangle 6316/4363 Shock Absorption Air Springs Firestone W01-358-7180 1/4 NPTF Gas Hole
Product Description:
AIRSUSTECH actuators have long been used in the industrial market as pneumatic actuators integrated into new and innovative machine designs and as replacement actuators for traditional pneumatic or hydraulic cylinders. Their advantages over traditional cylinders are that they are durable, operate well in corrosive and abrasive environments, are easily tolerant of misalignment, and have a high ratio of stroke to collapsed height.
2B6330 Specifications:
Air Fitting
Operation: Gas-filled
Gas Hole: 1/4 NPTF
Height
MAX. Height: 305 MM
MIN. Height: 81 MM
Stroke Height: 224 MM
Cover Plate
Top Cover Plate Width: 231 MM
Bottom Cover Plate Width: 231 MM
Hole/Stud
Hole/Stud Qty: Two on One Plate
Screw Center Distance: 157 MM
Distance Gas Hole Between Nut: 73 MM
Bolts Type: 2X3/8-16UNC
Rubber Bellows
Bellow Max. Diameter: 325 MM
Double Convolutions
Cross References:
| Goodyear | 2B12-425/311, 2B12 425/311 2B12425/311 | Firestone | W01-358-7180, W013587180 W01 358 7180, WO1-358-7180 WO13587180, WO1 358 7180 |
| Contitech | FD 330-22 363, FD 330 22 363 FD33022363, FD 33022 363 FD 33022363, FD330-22 363 FD330 22 363, FD33022 363 FD33022363, FD 33022 363 FD330-22363, FD 330-22363 | Watson & Chalin | AS0154 1G/01881F AS01541G/01881F |
| Triangle | 6316/4363 | Airkraft | 6316/4363 |
| EI Ride | 8030190 | Vibracoustic | VSP2B22R7180 |
| Leland | Sc2075 | Navistar | 1685179C1 |
| Hendrickson | 1VA1816 | Ridewell | 1003587180C |
| SAF Holland | 57007180 | Peerless | 0550 00001 |
Air Spring Components:
1. Air fitting: A tapped hole allowing for the spring to be fed from the air compressor
2. Nut/bolt/mount: The method for attaching the air spring to the component. Some air springs incorporate a bolt and air fitting combination device.
3. Bead plate: Crimped metal plate enclosing the spring and allowing attachment. This is typically forged steel, cast zinc alloy or cast aluminum.
4. Bellows: The physical, multi-layer material withholding the compressed gas. Usually made of neoprene or rubber. 2B6330 air springs are highly engineered elastomeric bellows with specially designed metal end closures. Our standard two ply air spring bellows is actually made up of four layers:
a. An inner liner of calendered rubber.
b. One ply of fabric reinforced rubber.
c. A second ply of fabric-reinforced rubber (with the cords at
a specific bias angle to the first ply).
d. An outer cover of calendered rubber
5. Girdle: Only found in air springs of convoluted design, separating the bellows chambers.
The Related Pictures of 2B6330:
