3B20F-2P03 Triple Convoluted Air Suspension Springs Industrial 1/2NPT Air Inlet
3B20F-2P03 Specification and Technical Parameters
| Nut/Blind nuts |
| Top plate screw | 2pcs × 3/8-16UNC |
| The distance between two screws on top plate | 89mm |
| Bottom plate screw | 2pcs × 3/8-16UNC |
| The distance between two screws on bottom plate | 89mm |
| Cover plate |
| Top plate | 160mm |
| Bottom plate | 160mm |
| Air inlet/ Air fittings/ Air hole | 1/2NPT, Offset, 44.5mm |
| Convolution number | 3 |
| Rubber Bellow Diameter | 223mm |
| Height | 340mm |
| Minimum compression | 80mm |
| Safe elongation | 195mm |
| Full stroke | 115mm |
| Bumper block | Without |
| Girdle hoop | 2 pieces |
Instructions for using rubber air spring
Warn
Do not inflate the airbag when it is not installed, unless the product is firmly installed in a suitable structure, the maximum pressure is 7 pressures, otherwise there is a risk of product damage or personal injury
Store
Store the airbag at room temperature, in a cool and dry place
Features
The airbag is made of high-quality elastic material, and its good dynamic performance ensures that the airbag is maintenance-free and has a long service life
Chemical resistance
Wide operating temperature range from -53°C to 70°C
Resistant to oily compressed air
Anti-dust and anti-alkaline and acid cleaners
Insensitive to atmospheric influences
Ozone resistant
The airbag is not resistant to the solvents of the following substances
solvent
Hydraulic oil
grease
Applications
Mining machinery and equipment
Vehicle applications
Automation technology
Conveyor systems
Agricultural machinery
Food industry
Paper and textile equipment
Pantograph drives
Sawmill machinery
Punch and forming presses
Transfer station
Tensioning station
Bark peeling machine
Edge control
Scissors-type lifting table
Veneering press
Automatic ram weight adjustment
Pantograph
Low installation height. In comparison to conventional pneumatic cylinders, GUOMAT air actuators contain no piston rod, making it possible to reduce the design height considerably. This allows compact constructions to be made.
Angular movement Depending on the type, GUOMAT air actuators can be used for tilt angles up to 30°. This enables the designer to simplify the articulated construction
The related picture of 3B20F-2P03 air spring/air shocks/air spring assembly/air bag
Product Tags:
|
|
3B20F-2P03 Triple Convoluted Air Suspension Springs Industrial 1/2NPT Air Inlet Images
|
